Custom Order?

Click here for our online form.

Color Samples?

Click here to request color samples.


Click here for information.

To get in touch with us:

Please complete the fields below.

Note: We have filled these values for you from your membership account. You are welcome to modify this information to change contact details for this message.

Phone: 586-786-9851


12550 31 Mile Rd,
Washington, MI 48095

Common Questions

Click the question to review the answer.

There are a lot of different colored bikes and plastics out there and we do our best our try to match them as close as we can. However, due to things like discoloration of plastics, specialty colors, and other variables we cannot guarantee our colors will match. If you are worried about a color not matching your bike or plastics we can send you color samples of our printed material for FREE by filling out our Color Sample Form. This will allow you to see an accurate representation of the color you will receive. Keep in mind that color variations between monitors, mobile devices, and actual print colors received can vary drastically, so better to be safe than sorry!

While our MotoWrapR tool allows for custom color changes and logo adds we realize some people want a one-off custom graphics kit designed from scratch. No problem! Our design team at MotoFX will work with you directly via email or phone to design you the custom snowbike graphics you've always wanted. Custom designed snowbike graphics start at $599 and we generally require the full amount or a deposit to be paid up front. Once the deposit is made a designer will work directly with you on up to 5 revisions of the design. To get started on a custom wrap please fill out our custom order form.

Once we receive your $200 deposit for your custom graphics you can expect an initial design proof in about 2-10 business days.

Our snowbike graphics are made with the highest quality motorsports vinyl on the market and are manufactured with built-in AIR-PASS technology. This means tiny channels have been cut into the back of the vinyl allowing air bubbles to escape more easily and making MotoFX Graphics kits a breeze to install. Every order also includes an application instructions sheet with it, read it carefully. If you follow this instruction sheet you shouldn't have any problem installing your graphics kit. Of course we are always here for help if needed: (586) 786-9851.

While it's not essential for installation, we do highly recommend using our application kit, which has been specifically designed for our wrap installation process. 

Use a heat gun or hair dryer to heat up the old graphics. Depending on the age and adhesive used, some vinyl requires more or less heat. Please be careful to not overheat the surface as too much heat may cause the plastic to melt. Sweep your heat gun in an up/down or side to side motion along the surface applying enough heat so that the old graphic is warm to the touch. This will make it malleable and easier to lift up. Then using our lil'chizler tool, a credit card, or just your finger nail, lift up an edge or corner of the old graphic and begin slowly pulling straight back at a 90 degree angle. For more information on the install process see our application instructions sheet.

First thing upon receiving your graphics kit is to roll it out and check it for any issues, mistakes, or missing pieces. Warning! Once the roll is cut up or pieces are removed from the backing, we will no longer accept it as a return item. Be sure to check it thoroughly. Once you've deemed the graphics to be "perfect" you can start the installation process. For more information on the install process see our application instructions sheet.

Using the correct tools is essential to installing your graphics properly. We highly recommend adding and application kit to your order to make this process easier, but you can use these tools as alternatives: 

  • Adhesive Remover (we recommend 3M Adhesive and Wax Remover)
  • Prep Liquid/Cleaner (90% Isopropyl alcohol works best)
  • Small Utility Blade (snap-off style recommended)
  • Cheap Paper Towels (dye-free/lint-free)
  • Blow Dryer or Heat Gun (not too hot)
  • Application Key (choose your model under our install tab from the home page to print your application key)

MotoFX uses only the very best vinyl and equipment to produce our graphics. Our graphics are printed on a very high quality 16mil thick vinyl and made with exclusive AIR-PASS Technology, which allows air bubbles to escape more easily for a bubble-free install. This means absolutely NO liquid is required for installation! MotoFX strives to be the very best in the industry and we stand behind our products completely!

MotoFX wraps are completely designed and manufactured in the U.S.A. and shipped worldwide.

Yes, our hassle free return policy makes returns easier than ever! All MotoFX Graphics purchases can be returned for full refund (excluding one-off custom designs and logo fees) within 14 days of receiving it as long as the graphics kit is in its original condition. Only cost to you is the return shipping. Please view our Returns/Exchanges page for more details.

Accidents happen...we got you covered! We have the ability to send you any replacement piece you need without all the stuff you don't. Fill out our replacements order form and we will get your replacements printed and shipped out to you asap.

Nobody's Perfect! Even the best companies occasionally make mistakes. If upon opening your package you discover the wrong item has been shipped to you, please contact us immediately by phone or by submitting a return form. We will do our best to quickly correct the mistake. The correct item will be printed and shipped to your door asap along with a return label for the incorrect one.

Once your order is placed it will take about 1-3 business days to process, print and ship. Shipping times will vary but US orders generally don't take any more than a week to receive.

Logos can be added to any MotoFX Graphics order at checkout using our logo selection tool.  This tool allows you to add up to one (1) Gold level logo (your main logo: approx. 8-12"), three (3) Silver level logos (approx. 4-6"), and six (6) Bronze level logos (approx. 1-3").  All logos regardless of size are $10 a piece.  Logos will be applied equally on each side of your bike and a proof will be sent to you to approve before we print and ship your order. 

We have most industry logos on file, but for specialty or personal logos that we do not have you will be asked to provide us with the logo(s) in vector format (Adobe Illustrator or .EPS files) as we cannot print any logos in standard image formats such as jpeg and png.

Our complete graphics kits (Rad. Shrouds, Fenders, Number Plates, Airbox, Fork Guards, Swing Arms) are $230 not including any extras or logos.  However, any graphics on our site can be ordered by individual sections so if you need any replacements you can just order the section you need without all the stuff you don't.  Prices by individual section vary based on your model.  All pricing can be found under the "pricing" button on our product pages or under the pricing tab on the menu.

Yes, we ship our graphics worldwide! Keep in mind that MotoFX is not responsible for any international import taxes or duty fees and cannot insure international orders outside of the US and Canada.

If you have placed an order with us you should receive a tracking number as soon as your item has been processed and shipped.  Shipping and processing times may vary based on season and order details (ie. an order with several logo adds or extras may take us a bit longer to process)

Click here for all frequently asked question's